To open Roadview Explorer, launch a compatible web browser and enter the following address: https://220.127.116.11\
Clicking the Search a Route button will open the Route Search panel, which may include the following options for searching:
Note that the available items you see may vary depending upon your setup.
Once you have selected the desired route options, click the Go To Mileage, Go To Frame ID, or Go To Location button. The route then opens at the specified mileage.
You can adjust the route position by clicking the Adjust Route button (). The Adjust Route window opens, where you can change the route position (such as change the mileage position, change the year/cycle, or change the lane). The range of values for the route is also displayed below each field.
Note that the options in the Route Adjust window may differ based on your system's setup.
You can zoom in on both the right-of-way and pavement images. To enter zoom mode for right-of-way images, click the Zoombutton in the control panel, or double click in the right-of-way images area.
An indicator appears at the top of the photo area telling you that the zoom mode is activated. The three right-of-way images can be zoomed and panned together. You can zoom with the mouse scroll wheel or by clicking the plus (+) and minus (-) controls on the right-side of the photo area. The current zoom factor is displayed between the plus and minus controls. Clicking the R control resets the image to the initial zoom.
You can exit the zoom mode by clicking the Zoom button again or by double-clicking in the right-of-way image area.
To zoom in on a pavement image (if shown), click the Enlarge (+) button on the bottom of the pavement image. The enlarged image appears in an overlay.
You can adjust the brightness and contrast of images in the photolog by right-clicking in the photolog and selecting the Adjust Images option. The adjustments panel then opens and you can adjust the brightness and contrast of each image. The adjustments will be maintained as you advance through or play through frames.
To remove any image adjustments, right-click in the photolog and select the Remove Adjustments option.
To save the photolog as a JPEG, right-click in the photolog and select the Save Image option. The image will be saved to your computer.
If there any adjustments to the camera positions to make multiple photolog images appear seamless, those adjustments will not be made in the saved image.
To export multiple photolog and pavement images into a zip folder, click the Export Images to Zipbutton to open an overlay.
The mileage range is auto-populated with the current mileage plus the next 10 frames. This may be adjusted. Use checkboxes to select the camera and pavement images you would like to download. Exceeding the limit of downloads will disable the download button.
The table displays information relevant to the frame that is being displayed, including:
When pavement images are available, they will appear next to the right-of-way images. To view a larger image of the pavement, click theicon at the bottom of the pavement image. The Pavement panel then opens.
In the Pavement panel, a larger view of the pavement image appears. The image is scaled to fit in the available space.
Frame Control allows for stepping forwards or backwards one frame.
If available, Transverse Profiles may be turned on.
To zoom in on the image, click the measuring icon at the top-right of the Pavement panel. Use the mouse wheel or zoom slider to zoom the image in and out. You can pan (slide) the image by dragging the mouse.
The following drawing tools are available:
You can remove all measurements from the image and the table by clicking the Clear button above the Measurements table.
Opening the map in its own window allows you to view, filter, and sort assets. Click theicon at the bottom of the map to pop out the map. The popped out map has a dropdown of different asset feature layers to select from. Selecting a layer will display the features of the current route on the map with an accompanying table.
Unchecking 'Only Current Route' will display all of the selected features in the project on the map and table. There is also an option to filter/sort by column.
Clicking on a row in the table will move the map to that feature's location. You can then double click on the map near the asset to load the location of that asset in Roadview Exploerer and view it in more detail on the main page.
The table can also be exported to a CSV.
Click the Printbutton to open a printable report containing the current images and route information.
You can email a link to the current route position to another user. To send a route position message, click the Email icon (), and complete the information in in the Email Route Link window. After the Route Link field, there is a button to copy the route's link to a clipboard as another method to share.
You can generate an IRI table and charts for IRI and Rutting for a given route. You can export the table as a CSV. To make the reports, click the IRI reports button () and a window will appear.
The table and chart will update with playback. The charts may be viewed either as a one mile section or the entire route by toggling Full Route. You can also jump to a specific location of a route by clicking on a row in the table or double clicking on the charts. Additionally, you can sort the table by any field in the table.
You can set default pavement image and map types for Roadview Explorer. These settings will be saved so that after you close Roadview Explorer, the next time you re-open or refresh the app, the settings will be in effect.
To set your preferences, click the settings icon () just above the embedded pavement image and embedded and popped out map. Dropdowns will appear where you can make your selection.
Improved synchronization of element updates on frame change, so that everything appears to change at the same time.
Added support for x35 camera pods to the image viewer. If other pod images are present, yellow arrow buttons will appear allowing the user to switch to another pod.
User management improvements, including group admins, the ability to login with either username or email and reactivation functionality
Functionality added to filter pop out map assets by drawing a box
Improved error handling when loading a route
Fixed issue causing incorrect pavement measurement tool values
Fixed straight line diagram issues when multiple routes are loaded.
Swapping route by cycle or lane uses latitude and longitude instead of mileage to determine which frame to load
Exporting to CSV will export all filtered results instead of just the current page.
A new feature was added to export multiple photolog and pavement images to a zip file. Select mileage range and cameras/pavement image types to export as a zip file.
A straight line diagram below the images allows for quick navigation of a route. Double click on the line or click and drag the green marker to jump to a specific mileage.
Pie chart added to track user group's usage
A checkbox will allow data to be toggled between a one mile of the current location and the full route.
Double clicking on the pavement data visualization will move route to desired position.
A mileage field in the map pop up allows for searching by current route's mileage. The values are auto populated initially.
A new button near the layer list will show and hide list. A button located below the layer list will expand map to fill window
User notified if searching route by map search will change projects, for example moving from Hawaii County to Hawaii State.
Prefix and Lane options in Route Search have tooltips that describe abbreviations.
Users are now organized into groups.
Date of last login column added to user management page.
Asset tables load faster
Map type change doesn't result in page reload.